turning — DownThisVideo! - Download videos from YouTube, GoogleVideo, Metacafe, DailyMotion, Vimeo, etc...

[View \| Download]	Designcord Autorewind Cable Reel with FIXED SOCKETS - No more tangled up cords! The Designcord Autorewind Cable Reels have FIXED SOCKETS. The FIXED SOCKETS make sure that the sockets/plugs stay in place when you wind or unwind the cord. No more tangled up cords! Tags: Designcord, automatic, cable, cord, fixed, non, power, reel, sockets, turning 1 Downloads - Last from: (Your Blog here!)
[View \| Download]	MicroMark 7 x 14" Deluxe Mini-Lathe overview and tutorial Brand New MicroMark 7 x 14" Manual Metal Lathe! I purchased this at www.micromark.com Item #82710. Check out www.nyccnc.com for more details Tags: 6061, CNC, DIY, Lathe, Machining, Mark, Micro, MicroLux, Micromark, TAIG, aluminum, benchtop, home, howto, machine, machinist, metal, nyccnc, shop, turn, turning, tutorial 1 Downloads - Last from: (Your Blog here!)
[View \| Download]	1.3 Machine Tool Basics -- Lathe Cutting Tools -- SMITHY GRANITE 3-in-1 http://www.smithy.com (view transcription of video below) Learn about the basics of metal lathe operations using our Smithy Granite combo lathe/mill/drill machines. You can visit us at www.smithy.com for more information or send us any questions about your project. Our trained technicians will be glad to help you with your project. "The selection of a cutting tool is probably the most important decision a machinist can make. We are going to cover some of the basics, but I urge everyone who intends to use the lathe, to learn as much about cutting tools as possible. They are the key to the quality of your work. Lathe tools are made from many different types of materials, in many sizes and styles. The three types we are using today are, from the left, high-speed steel tools, carbide-tipped tools, and on the right, carbide-insert tools. High-speed steel tools can be used on many turning operations, on all but the toughest alloys. The tools are sold as blanks in many sizes and grades. The machinist grinds the point of the tool depending on the type of metal he is cutting and the type of turning operation he intends to do. A good machinist's handbook will give you the standard guidelines for grinding high-speed steel tools. The cutting edge of a carbide-tipped tool is brazed to the end of a steel shank. The shape of the cutting edge, it's profile and cutting angles, are manufactured into the tool. A little cleanup on a green wheel, a silicone carbide grinding wheel, and the tool is ready to go. Cemented carbide will handle much more heat than high-speed steel, so carbide tools are able to cut tougher metals, and cut at higher speeds. Cemented carbide is also used to make small inserts that are clamped to a tool shank. This style insert is manufactured with a cutting edge on each of its three sides. After an edge is dulled, the insert can be unclamped and rotated to the next side. After all the edges are dulled, the insert is thrown away and replaced by a new one. Although this type of cutting tool was designed for the demands of the high production work, it's really a great tool for the beginner because it allows even the person with little or no tool sharpening experience the ability to easily maintain a properly formed, sharp tool. No matter what type of material the cutting tool is made of, it's the shape of the tool that determines how it can be used. The profile of the tool's point determines the type of cut the tool is designed to make. The location on the cutting edge on the point of the tool determines the direction that the tool will cut. Turning and facing tools are either right- or left-hand tools depending on which side of the tool shank the cutting edge is ground. Right-hand tools cut from right to left because the cutting edge is on the left side of the tool's point. Facing from the center of a part to the outer edge cutting right to left, requires a right-hand facing tool. Left-hand turning and facing tools cut from left to right, cutting away from the headstock in a turning operation, or from the outer edge to the center, in a facing operation. The cutting edges on these tools are on the right side of the tool's point. Sending a tool straight into a work piece is called a plunge cut. This type of cut requires a tool that has the cutting edge square on the nose of the tool. Here we are using a high-speed steel cutoff blade and holder. The position of the tool in the tool holder is very important. Tools should always be placed as far into the tool holder as possible. To give the cutting edge adequate support, and to reduce the possibility of the tool vibrating. In the case of a boring tool, only the length needed to clear the hole should extend out beyond the tool holder. The height of the tool should be set to match the center of the lathe axis. A lathe center placed in the tailstock can be used as a gauge to set the height. On this tool holder, shims and spacers are used to raise the tool. The tailstock is also used as a tool holder for drilling, reaming, counter-sinking and thread-tapping operations on the lathe." Tags: 3-in-1, Benchtop, Combination, Combo, Combo Machine, DYI, Drill, Granite, Granite 1324, Granite 1340, HSS, IMAX, Lathe, Lathe Mill Drill, MAX, Metalworking, Mill, Smithy, carbide, carbide insert, carbide tipped, customer, drill press, facing, facing tool, guarantees, high speed steel, machine tools, metal, metal drill, metal lathe, metal mill, milling, mini lathe, quality, service, shipping, tool holder, tools, turning, turning tool, vertical mill 1 Downloads - Last from: (Your Blog here!)
[View \| Download]	SR300: ScanRobot - the automatic book scanner (part no 2) The ScanRobot in action, scanning an old book from the 16 th century, by a speed of circa 1250 pages per hour. In this video the whole scanning process and the result in the software is visible. Tags: Treventus, book, bookscanner, buchscanner, bücher, page, scan-robot, scan-roboter, scannen, scanner, scanrobot, turner, turning 1 Downloads - Last from: (Your Blog here!)
[View \| Download]	Wood Turning: Wooden Spoon (2) Mounting in the Chuck Roughing down the shaft of a wooden spoon. http://aroundthewoods.com Tags: project, roughing, spoon, turning, wood 1 Downloads - Last from: (Your Blog here!)
[View \| Download]	MiFrith DJ [DancePlanet] 10min-mix MiFrith DJ @ DancePlanet ! Tags: 10, 1000, 2000, 2009, 800, apple, audio, back, bombar, bombastic, boratto, cdj, danceplanet, david, dj, djm, efx, ellaskins, gui, house, jaguar, jiijey, kidos, mac, macbook, maluco, mifrith, min, minimal, mix, moche, no, pioneer, reloop, som, sound, tech, technica, tiesto, tmn, tort, tudo, turning, vodafone, volcom, yeeee 1 Downloads - Last from: (Your Blog here!)
[View \| Download]	Turning a ball (knob) on the lathe. (radius turner) Making a threaded ball, knob or handle on a lathe using ball (radius) turning tool, Plans available from Steve Bedair's web site. http://bedair.org/Ball/ball.html slight adaptation of cutting tip by me :-) (Pasando una pelota (de pomo) en el torno.) (Passando uma bola (manípulo) sobre o torno mecânico.) (Passant une balle (bouton) sur la tour.) (Einschalten einer Kugel (Knopf) auf der Drehbank.)ボールを回して（ノブ）を旋盤です。) (至於一個球（旋鈕）對車床。) (至于一个球（旋钮）对车床。) (Svolta una palla (manopola) sul tornio.) Just a test to see if this helps internationally? ( Tags: 9x20, CNC, Not, ball, engineer, engineering, forming, knob, lathe, machine, machinist, metal, model, modelling, radius, sphere, steel, tool, tooling, turner, turning, work 1 Downloads - Last from: (Your Blog here!)
[View \| Download]	Rajnikanth - Theeratha Vilayattu Pillai - Netrikkan Watch Theeratha Vilayattu Pillai from Netrikkan where Superstar Rajnikanth plays a double role of father & son, also featuring Lakshmi, Sarita, Sarath Babu, Menaka, Vijayashanti, Gaundamani, Neelu, Anumanthu, S.I.R. Click http://www.rajshritamil.com to watch more Superhit Tamil songs. Tags: 1981, Action, Babu, Balachander, Balasubrahmanyam, Chennai, Color, Colour, Double, Drama, Ilayaraaja, Janaki, K., K.J., Kannadasan, Kavithalaya, Kavithalayam, Lakshmi, Malaysia, Menaka, Muthuraman, Netrikan, Netrikkan, P., Rajam, Rajnikanth, Role, S., S.P., Sarath, Saritha, Shailaja, Superstar, Sushila, Tamil, Tamizh, Vasudevan, Vijayashanti, Visu, Yesudas, cinema, dual, entertainmnent, game, kollywood, leaf, madras, new, over, playing, rape, turning, womanising 1 Downloads - Last from: (Your Blog here!)
[View \| Download]	The Maxis Tooling System (U.S. Patent Pending) - 2010 RW Tooling Systems brings you the MAXIS TOOLING SYSTEM. A revolutionary tooling system for the world of woodworking. Five primary functions - with amazing results! Tags: boring, carving, duplicator, easyrouter, joinery, lathe, maxis, milling, router, shaping, system, tooling, turning, wood 1 Downloads - Last from: (Your Blog here!)
[View \| Download]	7th AnGeL Productionz's very own C.E.O Become An 7th AnGeL Model CALL 201.210.8936 PROMOTIONAL MODELS WANTED Email: cocareef@gmail.com 7th AnGeL Productionz LLC www.myspace.com/cocareef1 www.modelmayhem.com/seventhangel Tags: 40C, 7th, ANNIVERSARY, ASS, BADU, BEAUTIFUL, BLUE, EEL, ELECTRIC, EYESHADOW, GOTHAM, HALL, LOUNGE, NYC, PHAT, PLACE, PRETTY, RICH, Rhianna, SKETCH, SPOT, THE, TUTORIAL, YEAR, angel, anna, antm, asia, avatar, azaliah, azz, booty, c.c, c.e.o, cocareef, da, damaga, destiny, exotic, glam, gorgeous, haze, heads, jay-z, jeru, kash, lady, lola, luv, mac, models, music, mustang, mwuah, naked, nars, nude, photography, productionz, ryda, semi, sexy, shake, studio, takiyah, thick, tiffani, tiger, trailer, turning, woods 1 Downloads - Last from: (Your Blog here!)